MIO MIVUE MP30/20 HELMET CAM MOUNT

MIO MIVUE MP30/20 HELMET CAM MOUNT

產品編號 : S00051063
品牌 :MIO
價錢 :
HKD168.00
數量 :
立即購買

買滿HKD$500 香港、澳門免基本運費 (減價產品及會員優惠不適用)
(海外客人注意需要自行承擔入口關稅及進口稅)

預計出貨時間: 預訂貨品請參閱商品說明內時間。現貨發貨時間: 1-3 個工作天

產品簡介

MIO 原廠 3M 頭盔支架,用嚟將 MiVue 頭盔行車記錄器黐喺頭盔外殼上,影第一身騎行畫面。適用 MiVue MP30 GPS、MP05、MP20 同 MP35,一個裝。想換頭盔、或者多頂頭盔輪住用,加多個支架就得,主機一扣即用。

主要特點

  • MIO 原廠配件
  • 3M 背膠,直接黐喺頭盔外殼
  • 適用 MiVue MP30 GPS/MP05/MP20/MP35
  • 適合加裝喺第二頂頭盔

安裝小貼士

  • 未確定好位置之前唔好撕離型紙,背膠重複黐會唔夠實
  • 先用酒精抹乾淨黐支架嘅位置,確保乾身、冇油、冇塵、冇蠟或防水鍍膜
  • 避免喺太潮濕、低過 15°C 或高過 38°C 嘅環境安裝
  • 揀頭盔表面平整嘅位置,避開有高低位或反弧位
  • 黐上去之後大力均勻撳實 30 秒,再放 24 小時先好用

規格 Specifications

  • 品牌 Brand:MIO
  • 類型 Type:3M 頭盔支架 3M helmet mount
  • 數量 Quantity:1 個 Single
  • 相容型號 Compatibility:MiVue MP30 GPS / MP05 / MP20 / MP35

English

This is a genuine MIO 3M adhesive helmet mount for attaching a MiVue helmet cam to your helmet shell for first-person riding footage. Sold singly, it fits the MiVue MP30 GPS, MP05, MP20 and MP35, so it's an easy way to set up a second helmet. Installation tips: don't peel the backing until you've confirmed the position; clean the area with alcohol so it is dry and free of oil, dust, wax or water-repellent coating; avoid high humidity and temperatures below 15°C or above 38°C; choose a flat area of the shell; press firmly and evenly for 30 seconds, then leave it for 24 hours before use.


圖片及介紹只供參考,一切以實物為實。歡迎向我們店員查詢。
Images and descriptions are for reference only; the actual product shall prevail. Please feel free to contact our staff.

客戶好評